- Equipment
- Instruments
- Furniture
- Chemicals
- Supplies & Consumables
- Safety & Apparel
- Thomas® Brand
- Clearance
- Browse By
For Customer Service Call 1.800.345.2100 International Sales
Delivering Quality Scientific Supplies Worldwide Since 1900
Clamps/Supports
Humboldt
Rectangular Enameled Steel Support Bases And Rods
With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished with…
Troemner
Labjaws Three-Prong Extension Clamps
Single or double adjust Full closure finger design grips small objects securely Double adjust model simplifies alignment problems Jaw profile gives maximum flexibility in gripping a wide range of objects. Nickel plated finish for maximum corrosion protection. Additional clamp holder (2824C83)…
Bel-Art Products
Scienceware® Lattice Support Stand
Expand your options in the laboratory Even distribution rods for maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as…
Troemner
Labjaws Double Buret Clamp
Holds two burets from micro to 100 mL size. Finger grip adjusters allow easy buret placement. Side grip on buret leaves graduations unobstructed. Rigid hook connector to support rod. Stand has 34 cm x 18 cm white porcelain glazed base. With 60 cm high aluminum rod.
Thomas®
Thomas Aluminum Lab-Lifts
Anodized aluminum construction Three sizes Convenient Thomas Aluminum lab-lifts provide stable height adjustment for lab items such as flasks, baths and small equipment weighing up to 45 lbs. Aluminum lab-lifts come in three sizes: 4” x 4”, 6” x 6” and 8” x 8”. Oversized knobs…
Troemner
Porcelain Buret Clamp Stand
White porcelain base 34 cm x 18 cm Supports 60 cm high aluminum rod
United Scientific Supplies
Test Tube Clamps
Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.
Troemner
Ultrajaws Multi-Purpose Clamps
Three prong extension clamps Easy to clean Single and dual prong adjustment Larger thumb screws (medium and large sizes) Innovative closed yoke minimizes contamination and corrosion of internal components. Single adjust clamps are good for applications where there is limited…
Troemner
Labjaws Flow Control Devices
Regular Hosecock Convex clamping surface gives greater clamping power with less pressure. Oversized screw head for accurate adjustment of fluid flow. Tubing retainer screw eliminates tubing slippage from clamp. Built-in side lugs for foot mounting. For bench or table mounting 2824B56 regular…
United Scientific Supplies
Buret Clamps
Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes. The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs. For use with rods up to 19mm diameter.
Ball & Socket Clamps
Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints.
Thomas®
Thomas Frame Connectors, Hooks & Support Apparatus
Hook Connector Stainless steel Polished finish Thomas offers a variety of clamps, connectors and apparatus to meet a variety of applications. Hook Connector: Simple, versatile and easy-to-use, the Thomas Hook Connector allows one-handed assembly of two components with one adjustment screw.…
Thomas®
Thomas 3-Prong Dual Adjustable Clamps
Wide adjustment range Autoclavable Stainless steel Polished finish Thomas Dual Adjustable Clamps are durable, multi-purpose clamps constructed of stainless steel and offer excellent chemical resistance and overall strength. The versatile 3-prong design secures a variety of lab…
Troemner
Labjaws Connectors
Regular Clamp Holder (2824C83) Regular clamp holders are used to hold extension clamps to lab frames where 90° positioning is required. Strong enough to be used as a lab frame rod connector. Streamlined design for easier cleaning and tightening. Maximum grip is 16 mm diameter. Jumbo Clamp…
United Scientific Supplies
Universal Clamp with Holder
Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.
Eastwood Manufacturing
Test Tube Holder
Brass wire, with formed loop on either side of handle providing finger grip, has self-closing jaws that take tubes 6 mm to 32 mm diameter.
Troemner
Labjaws Two-Prong Extension Clamps
Twin curved pads Single and double adjust Durable, heavy adjust model has one jaw fixed. Ideal for holding straight-sided objects such as burets, thermometers, beakers, etc. Nickel plated finish springs and rivets for long life. Additional clamp holder (2824C83) is required. Extension diameter:…
Bel-Art Products
Scienceware® Pinchcock Tubing Clamp
One piece pinchcocks molded of autoclavable white polycarbonate Release by thumb pressure 2848W26 Mini Clamp is single position on-off clamp; for use with thin-wall tubing less than 3/16” o.d. 2848W30 Clamp is 15-position ratchet- type for one-hand, stepwise flow control or shutoff;…
Thomas®
Ring Stands
Consisting of enameled steel support base with zinc-plated steel rod (8835B50 series) and 8091C20 series rings of zinc-plated steel with aluminum screw clamp Stands include one each 64, 89, 114 mm rings Listings indicate base dimensions and rod height
Thomas®
Thomas Heavy-Duty Stainless Steel Lab-Lifts
Exceptional stability and control Stainless steel construction Seven sizes for any application Autoclavable and chemical-resistant Thomas heavy-duty stainless steel lab-lifts are very stable lifting platforms that offer exceptionally high strength and durability. Constructed of stainless…
Troemner
Talboys Staining Rack
Slide Staining Rack Constructed of stainless steel, the Talboys Slide Staining Rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 533mm (21") inside.
Troemner
Labjaws Stainless Steel Frame Rods
Maximum strength and durability. Chemical compatibility and corrosion resistance are excellent. Uniform 13 mm diameter, up to 244 cm long with chamfered ends.
Bel-Art Products
Scienceware® Tubing Clamps
Screw Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…
United Scientific Supplies
Tripod Stand
Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.
United Scientific Supplies
Support Stands with Rods
These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.
United Scientific Supplies
Support Stands with Rod and Rings Sets
Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.
United Scientific Supplies
2 Prong Cork, PVC, and Silicone Lined Buret Clamp
Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…
Troemner
Ultra Flex Support System With Bench Clamp
Easily attaches top most lab benches Frees up bench space Flexible support arm Support system easily attaches to the side of your lab bench or counter top, which helps utilize more space in your lab. Ultra Flex clamping system is extremely versatile and features a flexible arm that…
Thermo Scientific Nalgene
Pinch Clamps
All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.
Troemner
Labjaws Small Water Bath Clamp
Suspends 6 to 13 mm thermometers over water bath. C clamp holder fits bath walls up to 9 mm thick. Overall length is 64 mm.
 |
 |
 |
 |
 |
 |
Site Search by
Back To Top
- We Believe You Are Important - How Can We Help?
Thomas Scientific is a Small Business, EEO supplier ©Thomas Scientific 2013