Hoods

Page  2  of 2 | Next
Sort
View
Show
Purifier® Logic®+ A2...
Labconco

Purifier® Logic®+ A2 Biosafety Cabinets

The NEW Purifier Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest,…

Purifier Cell Logic+...
Labconco

Purifier Cell Logic+ Class II A2 Biosafety Cabinets

The Purifier Cell Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest,…

Protector® Premier®...
Labconco

Protector® Premier® Laboratory Hoods

Protector® Premier® Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire…

Protector XStream...
Labconco

Protector XStream Laboratory Hood

The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

Protector XVS...
Labconco

Protector XVS Ventilation Station

Standard or extra height models 2-, 3- or 4-feet wide Protector XVS Ventilation Station provides user protection by keeping powders and fumes contained during light duty, fume-generating or weighing procedures. Patented features include air foil with Clean-Sweep openings to enhance airflow and…

XPert Filtered...
Labconco

XPert Filtered Balance Enclosure Systems

XPert Filtered Balance Systems provide user protection by keeping powders and particulates contained during weighing procedures. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to…

Zero Pressure...
Labconco

Zero Pressure Weathercaps

Made of strong, corrosion-resistant PVC. Caps fit atop standard PVC duct, permits vertical discharge of effluent air above roofline for dispersion away from the building. Caps add little static pressure to the exhaust system.

Bullet Blender Storm...
Next Advance

Bullet Blender Storm Homogenizer, 24V

The Bullet Blender Storm is the most powerful member of the Bullet Blender family. Homogenize up to 24 of your toughest samples (mouse femur, skin, cartilage, tumor, etc.) in just minutes. Air cooling & trade; minimizes sample heat up. Uses 1.5ml eppendorf safe-lock tubes. Includes the following:…

Filtermate Portable...
Labconco

Filtermate Portable Exhausters

Compact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to…

Fume Adsorbers
Labconco

Fume Adsorbers

Traps solvent vapors Fume Adsorber is designed for histology cover slipping and staining areas and uses activated carbon media to adsorb annoying odors and noxious vapors such as xylene and toluene. Solvent vapors are trapped in the capillary-like channels of the carbon filter while clean air is…

Envirco EACI Stand

Envirco EACI Stand

For use with EACI Enviralab Sterility Module (6278J20) Depth 0.82 meters; height 0.84 meters; width 1.19 m NOTE: Image might not represent exact model of product listed in clearance section.

Scienceware Clear...
Bel-Art Products

Scienceware Clear View Fume Hood

Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions One 6” OD…

Duct Inlet Valve
Labconco

Duct Inlet Valve

Valve with cover connects Duct Outlet with exhaust system.

Guardian Digital...
Labconco

Guardian Digital Airflow Monitor Kits

Monitor features an LCD that displays average face velocity. Audible/visual alarm alerts user to low or high face velocity. Kit is for installation in a factory-prepared cutout on the upper portion of the right side fixture panel. Kits are available for use with 115V, 60 Hz operation or 230V,…

Fiberglass 30...
Labconco

Fiberglass 30 Laboratory Hood

Corrosion-resistant, molded one-piece fiberglass liner 3/16” thick tempered safety glass sash with powder-coated handle By-pass airflow design The compact Fiberglass 30 Laboratory Hood is designed for efficient fume removal in labs with small space. Right side fixture panel is factory…

Carbon Filter Packs
Labconco

Carbon Filter Packs

Carbon Filter Pack. Activated Carbon Filter for non-radioactive organic vapors and odor control. Rated for 1000 CFM air flow with 0.2" static pressure drop. Dimensions: 28" W x 28" L x 25" H.

Spiral Tube
Labconco

Spiral Tube

Corrosion-resistant, neoprene-impregnated fiberglass reinforced with steel wire. Include rigid duct connector and two clamps. Because this ductwork is flexible and may conform to various configurations, it is not possible to know the precise equivalent resistance.

Protector Storage...
Labconco

Protector Storage Cabinets and Shelf Kits

Protector standard storage cabinet features 18 gauge steel exterior sidewalls that are epoxy-coated for chemical resistance. Cabinets feature two non-locking manual doors. Four individual leveling feet allow users to make adjustments to level the cabinet based on the condition of their floors.…

HEPA Filter Packs
Labconco

HEPA Filter Packs

HEPA Filter Pack. High Efficiency Particulate Air Filter for non-radioactive particulate applications. Rated for 1000 CFM airflow with initial 1.0" static pressure drop. Replaceable HEPA filter media removes 99.97% of all particulates 0.3 micron or greater. Includes clamping frame and duct…

Duct Outlet Valve
Labconco

Duct Outlet Valve

Quick connect fitting joins Flexible Exhaust Duct to wall or Duct Inlet Valve.

Scienceware Clear...
Bel-Art Products

Scienceware Clear View Fume Hood

Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions 6" OD vent…

Purifier Cell Logic+...
Labconco

Purifier Cell Logic+ Class II B2 Biosafety Cabinets

The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest,…

Thermoplastic Duct...
Labconco

Thermoplastic Duct Reducers

PVC coupling type reducer designed for connecting thermoplastic duct of different diameters with no equivalent resistance.

Sciencware® Tapered...
Bel-Art Products

Sciencware® Tapered Rear Exhaust Fume Hoods

Ideal Vent for Tanks and Vats These polypropylene exhaust hoods are intended to rest on the rear edge of a tank and draw a stream of air across the top of the tank, away from the operator. An exhaust system is required. Formula for calculating required airflow for hood: 1.833 x 150 = 274.95 CFM.…

Exhaust Transition...
Labconco

Exhaust Transition Adapters

Lower Exhaust Transition Adapters are epoxy-coated steel, 2" x 10" rectangular to 5" or 6" diameter round for connection to 5" or 6" ID hose. Allows for connection of hose to the bottom of the rear plenum of the XPert Balance Enclosure, Protector XVS Ventilation Station, Protector Work Station or…

Wash Rings
Labconco

Wash Rings

Wash Ring, wide angle conical spray nozzle, and wash water connection nipple are fabricated into a PVC coupling. For Stainless Steel or PVC Perchloric Acid Hoods. 10" Diameter Flow rate is one gallon per minute at 40 psi. 12" Diameter Flow rate is 0.70 gallons per minute at 20 psi.

Purifier Logic+...
Labconco

Purifier Logic+ Class II B2 Biosafety Cabinets

The Purifier Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest, fully…

Protector Work...
Labconco

Protector Work Stations

Face velocities from 60 to 100 fpm Built-in dynamically-balanced motorized impeller Speed controlled to achieve desired inflow velocity Protector Work Stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a…

Uniflow Fume Hood...
Hemco

Uniflow Fume Hood Service Fixtures

Wall mounted Specialty right or left Epoxy-coated brass Four remote controlled service fixtures make up this set. Color-coded index buttons with matching color-coded serrated hose tips. Specify right or left service set. Cam be order in combination with other fixtures.

PVC T & Y...
Labconco

PVC T & Y Connections

PVC fitting compatible with thermoplastic duct. End connections receive PVC pipe directly. 0516E96 - PVC "T" Connection: Duct Diameter: 10" Duct Diameter: 12" Duct Connection Diameters: 10" x 10" x 12" Height: 19" Equivalent Resistance in feet of Straight Duct: 20'…

Sash stop kit
Labconco

Sash stop kit

Sash Stop Kit. Restricts how far a vertical-rising sash may be opened. Compatible with Protector Xstream and Premier Fume Hoods

Solid Epoxy Work...
Labconco

Solid Epoxy Work Surfaces

Black chemical-resistant work surface is contoured to fit the dimensions of the enclosure and to contain spills. These surfaces can be used with Protector XVS Ventilation Stations, Protector Work Stations, Purifier Non-Ventilated PCR Enclosures and Tissue Culture Enclosures.