General Purpose Viscosity Standards

Based on NIST value of 1.0016 centipoise for water at 20C; conforms to ASTM Standards D 445, D 88 and D 2161; traceable to NIST Approximate viscosities at varying temperatures in centistokes and centipoises are given in Table 1; each standard is furnished with actual viscosity and density values.…

Related Searches: Viscosity Standard

Ink and Paint Viscosity Standards

For ink and paint viscometers For use with Zahn, Shell and Ford viscometer cups. Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate kinematic viscosity and drain times for the various cups at 25°C are given in table. Actual values are furnished with each…

Related Searches: Zahn Cup

Low Temperature Viscosity Standards

For Low Temperature Gear Oils (SAE 70W, 75W, 80W and 85W). Also for ATF fluids. See ASTM D 2983.

Certified Viscosity “Check Oils” for SAE Target Viscosities

CANNON Instrument Company has released a line of viscosity check oils specifically designed for verification of SAE target viscosities per ASTM D 445, D 5293, and D 4684. The CVCO (Certified Viscosity Check Oil) series includes formulated commercial engine oils with certified values for kinematic…

Silicone Viscosity Standards

For calibration of rotational viscometers Viscosity certified at 20, 23, 24, 25, 26 and 27°C Calibrated to a precision of ?0.2% NIST traceable Standards are based on the National Institute of Standards and Technology (NIST) value of 1.0016 mPa-s (centipoise) for water at 20°C…

Related Searches: Viscosity Standard

Cold Cranking Simulator Viscosity Standards

Conform to SAE specification J300 and ASTM D 5293 Viscosities based on NIST value of 1.0016 centipoise for water at 20°C Traceable to NIST Supplied in one pint bottles

Related Searches: Viscosity

Cold-Cranking Simulator Standards

CANNON CL Standards provide certified dynamic viscosity data (in cP or mPa·s) at temperatures from –5°C to –35°C. These standards are used to calibrate the CANNON Cold-Cranking Simulator (CCS) oil testing (see ASTM D 5293 and SAE Specification J300).

Paint Viscosity Standards

For Thomas®-Stormer® Viscometers Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate viscosity in centipoise and Krebs unit values at 25°C are given in table below. Actual value are furnished with each standard. Supplied in a one pint bottle.

Related Searches: Viscometer

High Viscosity Standards

For determining viscosities in asphalt and polymers (see ASTM D 2170 and D 2171) Traceable NIST For Kinematic Viscosity Values (cSt), please contact Thomas Scientific

Related Searches: Viscosity Standard

Low-Temperature Viscosity Standards

For determining the viscosity of low-temperature gear oils and ATF fluids (see ASTM D 2983) Traceable to the NIST Viscosity 150,000 cP at temperature indicated in table below Offered in one pint bottles

Related Searches: Viscosity Standard

High-Temperature Viscosity Standards

For use with Cannon High Temperature/ High Shear Viscometers for measurements at 150°C and 10 -6 s -1 shear rate Based on NIST value of 1.0016 centipoise for water at 20°C; traceable to the NIST In accordance with ASTM Standard D 4624 9727U92 and U94 are non-Newtonian…

Related Searches: Cannon

Viscosity Standard, -20 and -25°C for CMRV, 500 ml

For preceding the borderline pumping temperature of engine oil in accordance of ASTM Standards D 3829 and D 4684 Viscosity of 30,000 centipoise at -20°C based on NIST value of 1.0016 centipoise for water at 20°C; traceable to NIST

Related Searches: Viscosity Standard

Viscosity Std, 10 cSt